Solar Inverter: PVS-100/120-TL Overview

General Description

The PVS-100/120-TL is a cloud-connected, three-phase string inverter designed by FIMER for cost-efficient, decentralized photovoltaic (PV) systems. It is suitable for both ground-mounted and large commercial applications.

Key Features

• Power Rating: 100 kW for 400 Vac and 120 kW for 480 Vac
• MPPTs: Up to 6 independent Maximum Power Point Trackers (MPPT)
• Efficiency: Maximum efficiency up to 98.9%
• Installation: Supports both vertical and horizontal mounting
• Connectivity: Wi-Fi standard for configuration, two Ethernet ports
• Communication: Modbus RTU/TCP (Sunspec compliant)
• Environmental Protection: IP66 for the main body, IP54 for the cooling section

Technical Specifications

Input Side

• Max DC Input Voltage: 1000 V
• Start-up DC Input Voltage: 420 V (400-500 V)
• Operating DC Input Voltage Range: 360-1000 V
• Rated DC Input Voltage:
  • PVS-100-TL: 620 V
  • PVS-120-TL: 720 V
• Rated DC Input Power:
  • PVS-100-TL: 102000 W
  • PVS-120-TL: 123000 W
• MPPT Input Voltage Range:
  • PVS-100-TL: 480-850 V (symmetrical load)
  • PVS-120-TL: 570-850 V (symmetrical load)
• Max DC Input Power per MPPT:
  • PVS-100-TL: 21000 W or 63000 W (depending on MPPT configuration)
  • PVS-120-TL: 25000 W or 75000 W (depending on MPPT configuration)
• Max DC Input Current per MPPT:
  • PVS-100-TL: 36 A or 108 A
  • PVS-120-TL: 36 A or 108 A
• Max Input Short Circuit Current per MPPT: 50 A or 150 A
• DC Connection Type: PV quick fit connector, various cable glands

Output Side

• Grid Connection Type: Three-phase 3W+PE or 4W+PE
• Rated AC Power:
  • PVS-100-TL: 100000 W
  • PVS-120-TL: 120000 W
• Max AC Output Power:
  • PVS-100-TL: 100000 W
  • PVS-120-TL: 120000 W
• Rated AC Grid Voltage:
  • PVS-100-TL: 400 V
  • PVS-120-TL: 480 V
• AC Voltage Range:
  • PVS-100-TL: 320-480 V
  • PVS-120-TL: 384-576 V
• Max AC Output Current: 145 A
• Rated Output Frequency: 50 Hz / 60 Hz
• Output Frequency Range: 45-55 Hz / 55-65 Hz
• Nominal Power Factor: > 0.995, adjustable range 0-1 inductive/capacitive
• Total Current Harmonic Distortion: < 3%
• Max DC Current Injection: < 0.5%*In

Protection and Monitoring

• Input Protection: Reverse polarity protection, over-voltage protection, isolation control, residual current monitoring, DC switch rating, and fuse rating.
• Output Protection: Anti-islanding protection, external AC overcurrent protection, output overvoltage protection with replaceable surge protection device (Type 2).

Environmental and Physical

• Operating Temperature Range: -25 to +60°C (-13 to 140°F) with derating above 40°C (104°F)
• Relative Humidity: 4% to 100% condensing
• Sound Pressure Level: Typical 68 dB(A) at 1 meter
• Max Operating Altitude: 2000 meters (6560 feet)
• Cooling: Forced air
• Dimensions: 869 x 1086 x 419 mm (34.2” x 42.7” x 16.5”)
• Weight: 70 kg (154 lbs) for power module; ~55 kg (121 lbs) for wiring box; overall max 125 kg (276 lbs)
• Mounting System: Mounting bracket for vertical and horizontal support

Communication and Interface

• Embedded Communication Interfaces: 1x RS485, 2x Ethernet (RJ45), WLAN (IEEE802.11 b/g/n @ 2.4 GHz)
• User Interface: 4 LEDs, Web User Interface
• Communication Protocol: Modbus RTU/TCP (Sunspec compliant)
• Commissioning Tool: Web User Interface, Mobile APP/APP for plant level
• Remote Monitoring Services: Aurora Vision monitoring portal
• Advanced Features: Embedded logging, direct telemetry data transferring to ABB cloud

Available Product Variants

• Inverter Power Module: PVS-100-TL-POWER MODULE / PVS-120-TL-POWER MODULE
• Wiring Box Versions:
  • SX2: Individual string monitoring, positive pole fuses, DC disconnect switches, surge arresters
  • SX: Individual string monitoring, both positive and negative pole fuses, DC disconnect switches, surge arresters
  • SY2: MPPT level input current monitoring, positive pole fuses, DC disconnect switches, surge arresters
  • SY: MPPT level input current monitoring, both positive and negative pole fuses, DC disconnect switches, surge arresters
  • S2: MPPT level input current monitoring, cable gland input, DC disconnect switches, surge arresters

Optional Accessories

• AC Plate for Single Core Cables: Various individual AC cable glands
• AC Plate for Multi Core Cables: Various individual AC cable glands
• Pre-Charge Board Kit: Night time operation with restart capability
• Grounding Kit: Allows connection of the negative input pole to the ground

Compliance and Standards

• Safety and EMC Standards: IEC/EN 62109-1, IEC/EN 62109-2, EN 61000-6-2, EN 61000-6-4
• Grid Standards: Various international standards including CEI 0-16, IEC 61727, IEC 62116, etc.

Remarks

• Technical Changes: FIMER reserves the right to make technical changes without prior notice.
• Product Variants: Features not specifically listed in the present data sheet are not included in the product.