General Description Model: KP100L Photovoltaic Inverter Features: Versatile matching for Monocrystal and Polycristal solar modules Top level performance with 3 MPPT and wide MPPT voltage range Max peak output power (+10%) Smart control for solar tracker Applicable Countries: Italy, Spain, France, Germany, Czech Republic, Portugal, Greece (Mainland), Denmark, Turkey, Republic of South Africa Order Code: KP100L-OD-EU Specifications DC Input Max. open-circuit voltage: 850 VDC DC voltage range: 200 to 850 VDC MPPT voltage range: 225 to 850 VDC Nominal voltage: 585 VDC Number of MPPT: 3 Type of DC terminals: MC4 Max. current per one pair of DC terminals: 13 ADC Max. power per one pair of DC terminals: 5,500 W AC Output Nominal power: 10,000 W Peak power (10 minutes): 11,000 W Nominal Output Current: 14.5 A Output voltage: 230/400 VAC Nominal frequency: 50 Hz Output frequency range: 45 to 55 Hz THD of output current: 4% or less Power factor (cos phi): 1 (typical) (at output power 10 kW) Wiring system: 3-phase 4-wire Performance Max. efficiency: 97.5% European efficiency: 97.1% Standby consumption power: 1 W or less Night time consumption power: 1 W or less Certifications EMC: EN 61000-6-2, EN 61000-6-3, EN 61000-3-2 Low voltage regulation: EN50178 German regulation: VDE0126-1-1 Spanish regulation: RD1663/2000 Italian regulation: DK5940 Ed2.2 Other Specifications Operation temperature range: 20 to +60C Tolerable relative humidity: 4 to 100%, non-condensing Degree of protection: Housing: IP65 (acc. To DIN EN60529) Cooling: Forced ventilation Dimensions (W H D): 455 700 270 mm Weight: Approx. 42 kg Display: LCD (16 characters, 2 lines) Data transmission: RS-232C/RS-485 Warranty: 5 years (Option for 10 years) Key Features ZCC Circuit: Developed in collaboration with a leading Japanese university, enhancing efficiency and power output. 3 Individual MPP Trackers: Ensures high power efficiency and maximum power output. Diagram Description The inverter contains: EMI Filters 3 Boosters with MPPT DC/AC converter AC breaker Ground fault breaker (RCD) SPD (Surge Protection Device) DC switch or breaker DC Bus RLY1 and RLY2 CPU1 and CPU2 for control Communication facilities (RS-232C or RS-485) AUX facilities (AUX_IN, AUX_OUT) The internal structure highlights the use of ZCC circuits and individual MPPTs. Interface Data Transmission: RS-232C/RS-485