UNO-DM-TL-PLUS-US-Q Solar Inverter Series Overview
General Description:
The UNO-DM-TL-PLUS-US-Q is a family of single-phase string inverters designed for residential installations. It offers power ratings from 3.3 kW to 5.0 kW, combining FIMER’s engineering excellence in a lightweight and compact design.
Model Variants:
- UNO-DM-3.3-TL-PLUS-US-Q
- UNO-DM-3.8-TL-PLUS-US-Q
- UNO-DM-4.6-TL-PLUS-US-Q
- UNO-DM-5.0-TL-PLUS-US-Q
Key Features:
-
Power Ratings: 3.3 kW to 5.0 kW
-
Dual MPPT: Two Maximum Power Point Trackers (MPPT) for optimal power output
-
Wireless Communication: Simple and safe installation with no need to open the inverter’s front cover
-
User Interface: Embedded UI for advanced configuration and control accessible via WLAN-enabled devices
-
Smart Capabilities: Embedded logging, remote monitoring via Aurora Vision, Modbus compliance, and smart grid integration
-
Module Level Rapid Shutdown (RSD): Compliant with NEC 2017 and NEC 2020 safety requirements
-
Efficiency: Maximum efficiency of up to 97.4%
-
Compliance: UL 1741 SA compliant
Technical Specifications:
Electrical Characteristics:
Type Code |
UNO-DM-3.3-TL-PLUS-US-Q |
UNO-DM-3.8-TL-PLUS-US-Q |
UNO-DM-4.6-TL-PLUS-US-Q |
UNO-DM-5.0-TL-PLUS-US-Q |
Rated Grid AC Voltage (Vacr) |
208 V / 240 V |
208 V / 240 V |
208 V / 240 V |
208 V / 240 V |
Nameplate Apparent Power (Smax) |
3300 VA |
4200 VA |
4600 VA |
5000 VA |
Nameplate Output Active Power (Pmax) |
3300 W |
4200 W |
4600 W |
5000 W |
Output Active Power @VACr |
2700-3000 W |
3450-3780 W |
4140-4500 W |
4118-4500 W |
Input Characteristics:
| Number of MPPT Channels | 2 | 2 | 2 | 2 | | Max Usable Power per Channel | 2000 W | 3000 W | 3000 W | 3500 W | | Absolute Max Voltage (Vmax) | 600 V | 600 V | 600 V | 600 V | | Start-Up Voltage (Vstart) | 200 V (Adj. 120-350 V) | 200 V (Adj. 120-350 V) | 200 V (Adj. 120-350 V) | 200 V (Adj. 120-350 V) | | Max Usable Current per Channel | 10 A | 16 A | 16 A | 19 A (CH1) / 11.5 A (CH2)| | Max Current (Idcmax) | 20 A | 32 A | 32 A | 30.5 A |
Output Characteristics:
| Grid Connection Type | 1Φ/2W, Split-Φ/3W | 1Φ/2W, Split-Φ/3W | 1Φ/2W, Split-Φ/3W | 1Φ/2W, Split-Φ/3W | | Adjustable Voltage Range (Vmin-Vmax) | 183-228 V, 211-264 V | 183-228 V, 211-264 V | 183-228 V, 211-264 V | 183-228 V, 211-264 V | | Grid Frequency | 60 Hz | 60 Hz | 60 Hz | 60 Hz | | Max Current (Iac,max) | 14.5 A | 16 A | 20 A | 22 A | | Power Factor | >0.995, adj. +/-0.8 | >0.995, adj. +/-0.8 | >0.995, adj. +/-0.8 | >0.995, adj. +/-0.8 | | Total Harmonic Distortion | <2% | <2% | <2% | <2% | | Max AC OCPD Rating | 20 A | 20 A | 25 A | 30 A |
Efficiency:
| Maximum Efficiency | 97% | 97% | 97% | 97.4% | | CEC Efficiency | 96.5% | 96.5% | 96.5% | 97% |
Environmental and Safety:
-
Standby Consumption: <8 WRMS
-
Nighttime Consumption: <0.6 WRMS
-
Operating Performance: High efficiency and low standby consumption
-
Protection: Reverse polarity protection, over-voltage protection, PV array ground fault detection, anti-islanding protection
Communications:
-
Embedded Communication Interface: Wireless
-
Protocols Supported: Modbus TCP (SunSpec), optional RS485 with Modbus RTU (SunSpec), Aurora Protocol
-
Monitoring: Aurora Vision cloud (Plant Portfolio Manager, Plant Viewer, Energy Viewer)
-
Optional Boards: UNO-DM-COM kit for RS485, alarm/load manager relay, remote ON/OFF, UNO-DM-PLUS Ethernet COM kit
Advanced Functionalities:
-
Dynamic Feed-in Control: Enables efficient feed-in management
-
Remote Monitoring: Via Aurora Vision
-
Rapid Shutdown: Integrated module level RSD PLC transmitter for safety compliance
-
Firmware Upgrade: Remote Over The Air (OTA) updates for inverter and components
Additional Information:
-
Compliance: UL 1741 SA compliant
-
Installation: Easy installation and fast commissioning with QR code access