Peimar PSI-X3P6000-HY | PSI-X3P8000-HY | PSI-X3P10000-HY Manual

By Erik Zaikin
3 min read

NOCTIS 3 LINE | INVERTER IBRIDO TRIFASE

Models: PSI-X3P6000-HY | PSI-X3P8000-HY | PSI-X3P10000-HY

Battery Parameters

  • Compatible Batteries: Peimar PSI-X-BT-5.8MST-HV (Master) and Peimar PSI-X-BT-5.8SLV-HV (Slave)
  • Battery Configurations:
    • Peimar PSI-X-SYS-H11.5-HV (1 Master + 1 Slave)
    • Peimar PSI-X-SYS-H17.3-HV (1 Master + 2 Slaves)
    • Peimar PSI-X-SYS-H23.0-HV (1 Master + 3 Slaves)
  • Battery Type: Lithium (LiFePO4)
  • Input Voltage Range: 160 - 800 V
  • Max Continuous Charge/Discharge Current: 25 A
  • Communication Interface: CAN / RS485
  • Reverse Connection Protection: Yes

DC Input

Specification PSI-X3P6000-HY PSI-X3P8000-HY PSI-X3P10000-HY
Maximum DC Power 9000 W 12000 W 15000 W
Maximum DC Voltage 1000 V 1000 V 1000 V
MPPT Voltage Range 180 - 950 V 180 - 950 V 180 - 950 V
Nominal DC Voltage 720 V 720 V 720 V
Start Voltage 180 V 180 V 180 V
Max DC Input Current 12 / 12 A 24 / 12 A 24 / 12 A
Max Short-Circuit Current 14 / 14 A 28 / 14 A 28 / 14 A
Number of DC Inputs per MPPT 1 / 1 2 / 1 2 / 1
Number of MPPT Trackers 2 2 2
DC Switch (DC-PV1) Integrated Integrated Integrated

Meter

Feature Specification
Compatible Meters Peimar PSI-X-3PMETER-HY (up to 80 A direct insertion) Peimar PSI-X-3PMETER-HY-TA (up to 200 A indirect measurement, external CT)
Functionality Measure electrical parameters of draw and injection, necessary for managing external loads and charge/discharge of the storage system

General Information

Feature Specification
Topology Transformerless
Operating Temperature Range -20°C to +60°C (derating from +45°C)
Cooling Method Natural convection
Environmental Humidity 0% to 100% non-condensing
Storage Temperature -20°C to +60°C
Altitude Up to 4000 m
Noise < 40 dB
Protection Class IP65
Dimensions (H x W x D) 654 x 457 x 228 mm
Net Weight 45 kg
Warranty 10 Years

AC Output

Specification PSI-X3P6000-HY PSI-X3P8000-HY PSI-X3P10000-HY
Nominal AC Power 6000 VA 8000 VA 10000 VA
Maximum AC Power 6600 VA 8800 VA 11000 VA
Nominal AC Current 8.7 A 11.6 A 14.5 A
Maximum AC Current 9.6 A 12.8 A 15.9 A
Grid Nominal Voltage 400 / 230 V, 380 / 220 V
Grid Nominal Frequency 50 / 60 Hz
Power Factor (cos φ) 0.8 capacitive - 0.8 inductive
Total Harmonic Distortion (THDi) < 3%
Connection Three-phase 3L + N + PE

AC Output (EPS Mode with Battery)

Specification PSI-X3P6000-HY PSI-X3P8000-HY PSI-X3P10000-HY
Maximum AC Power 6000 VA 8000 VA 10000 VA
Maximum Peak Power < 12000 VA, 60 s < 14000 VA, 60 s < 15000 VA, 60 s
Nominal Voltage 400 / 230 V, 380 / 220 V
Frequency 50 / 60 Hz
Maximum Continuous Current 8.7 A 11.6 A 14.5 A
Conversion Time < 1.5 s
Total Harmonic Distortion (THDv) < 2 % (linear load)
Switching Interlock Panel Supply not included. Refer to instructions at www.peimar.com

Efficiency

Feature Specification
MPPT Efficiency 99.9 %
Maximum Efficiency 97.8 %
European Efficiency 97.0 %
Battery Charge/Discharge Efficiency 97.0 / 96.0 %

Interface

Feature Specification
AC Connection Terminal block
Photovoltaic Input MC4
Battery Connection Connectors
Display Backlit LCD, 20 x 4 characters
Communication Mode Wi-Fi (PSI-X-H-WIFI module included) / LAN (optional PSI-X-H-ETH module)
Communication Ports (Internal and Battery) Ethernet / RS485 / USB / CAN / BMS
Parallel Composition Up to 10 inverters of different models in the Noctis 3 line

Note: The technical data, information, and illustrations contained in this document are for indicative purposes only. Peimar reserves the right to modify the data, drawings, and information at any time without prior notice.