Peimar PSI-J2000-TL | PSI-J2500-TL | PSI-J3000-TL Manual


От Erik Zaikin
3 мин чтения


PSI-J2000-TL | PSI-J2500-TL | PSI-J3000-TL Inverter Characteristics

Flexible and Efficient

  • Optimized MPPT algorithm, MPPT efficiency over 99.9%
  • Maximum efficiency over 97.4%, European efficiency over 96.9%
  • Wide input voltage range (50 V - 500 V / 550 V), compatible with small systems starting from 3 modules
  • Improved generation capacity with reduced derating at high temperatures

Easy Installation

  • Transformerless, with reduced size and weight
  • Quick installation and maintenance thanks to plug-in connection systems
  • MC4 connectors provided with the inverter

Intelligent and User-Friendly System

  • Built-in independent RTC chip with 25-year data storage capacity
  • Integrated RS-232 interface with Wi-Fi module for better communication
  • Free online monitoring system
  • Intelligent management locally and remotely via PC, iOS, and Android devices
  • Automatic adjustment of active/reactive power fed into the grid

Safe and Reliable

  • Indoor and outdoor installation thanks to IP65 protection class
  • Aluminum casing for better heat dissipation and higher corrosion resistance
  • Integrated DC switch
  • Natural convection cooling

General Information

Feature Specification
Topology Transformerless
Nighttime consumption < 0.2 W
Standby consumption 6 W
Operating temperature range -25 °C to +60 °C (45 °C to 60 °C with derating)
Cooling method Natural Convection
Environmental humidity 0% to 100% non-condensing
Altitude Up to 2000 m (without derating)
Noise < 25 dBA
Overvoltage category II (DC input), III (AC output)
Protection class IP65 (Indoor and outdoor installation)
Mounting Wall mounting bracket
Dimensions (H x W x D) 354 x 305 x 120 mm
Net weight 7.8 Kg (PSI-J2000-TL), 8.3 Kg (PSI-J2500-TL), 8.4 Kg (PSI-J3000-TL)
Warranty 5 Years

AC Output

Specification PSI-J2000-TL PSI-J2500-TL PSI-J3000-TL
Nominal AC power 2000 W 2500 W 3000 W
Maximum AC power 2200 W 2750 W 3000 W
Nominal AC current 8.7 A 10.9 A 13.0 A
Maximum AC current 9.7 A 12.8 A 14.5 A
Nominal AC voltage / Range 220 V, 230 V, 240 V / 180 - 280 V
Grid frequency / Range 50 Hz, 60 Hz / ±5 Hz
Power factor (cos φ) > 0.99 at full load
Total harmonic distortion < 3%
Connection Single phase 1L + N + PE

DC Input

Specification PSI-J2000-TL PSI-J2500-TL PSI-J3000-TL
Maximum DC power 2400 W 3000 W 3630 W
Maximum DC voltage 500 V 500 V 550 V
MPPT voltage range 60-450 V 60-450 V 60-500 V
Nominal DC voltage 360 V 360 V 360 V
Start voltage 70 V 70 V 70 V
Minimum DC voltage 50 V 50 V 50 V
Maximum DC input current 11 A 11 A 11 A
Maximum short-circuit current 13.2 A 13.2 A 13.2 A
Number of DC inputs per MPPT 1 1 1
Number of MPPT trackers 1 1 1
DC switch (DC21B) Integrated Integrated Integrated

Certificates

For a complete list of certificates, please refer to the Peimar website.

Electrical Diagram

Protection

Feature Specification
Internal overvoltage protection Integrated
DC insulation monitoring Integrated
DCI monitoring Integrated
GFCI monitoring Integrated
Grid monitoring Integrated
AC short-circuit current protection Integrated
Thermal protection Integrated
Anti-islanding protection (AFD) Integrated

Interface

Feature Specification
AC connection Plug connector
DC connection MC4 / H4
Display LCD (16 x 2 characters, backlit)
LED 3 Lights
Display language Italian / English / Spanish
Communication ports RS-232
Communication mode Wi-Fi / Ethernet (optional)

Performance

Specification PSI-J2000-TL PSI-J2500-TL PSI-J3000-TL
Maximum efficiency 97.4% 97.5% 97.6%
European efficiency 96.9% 97.0% 97.1%
MPPT accuracy > 99.9% > 99.9% > 99.9%

Note: The technical data, information, and illustrations contained in this document are for indicative purposes only. Peimar reserves the right to modify the data, drawings, and information at any time without prior notice.