Peimar PSI-X3P6000-HY | PSI-X3P8000-HY | PSI-X3P10000-HY Manual
NOCTIS 3 LINE | INVERTER IBRIDO TRIFASE
Models: PSI-X3P6000-HY | PSI-X3P8000-HY | PSI-X3P10000-HY
Battery Parameters
-
Compatible Batteries: Peimar PSI-X-BT-5.8MST-HV (Master) and Peimar PSI-X-BT-5.8SLV-HV (Slave)
-
Battery Configurations:
- Peimar PSI-X-SYS-H11.5-HV (1 Master + 1 Slave)
- Peimar PSI-X-SYS-H17.3-HV (1 Master + 2 Slaves)
- Peimar PSI-X-SYS-H23.0-HV (1 Master + 3 Slaves)
-
Battery Type: Lithium (LiFePO4)
-
Input Voltage Range: 160 - 800 V
-
Max Continuous Charge/Discharge Current: 25 A
-
Communication Interface: CAN / RS485
-
Reverse Connection Protection: Yes
DC Input
| Specification |
PSI-X3P6000-HY |
PSI-X3P8000-HY |
PSI-X3P10000-HY |
| Maximum DC Power |
9000 W |
12000 W |
15000 W |
| Maximum DC Voltage |
1000 V |
1000 V |
1000 V |
| MPPT Voltage Range |
180 - 950 V |
180 - 950 V |
180 - 950 V |
| Nominal DC Voltage |
720 V |
720 V |
720 V |
| Start Voltage |
180 V |
180 V |
180 V |
| Max DC Input Current |
12 / 12 A |
24 / 12 A |
24 / 12 A |
| Max Short-Circuit Current |
14 / 14 A |
28 / 14 A |
28 / 14 A |
| Number of DC Inputs per MPPT |
1 / 1 |
2 / 1 |
2 / 1 |
| Number of MPPT Trackers |
2 |
2 |
2 |
| DC Switch (DC-PV1) |
Integrated |
Integrated |
Integrated |
Meter
| Feature |
Specification |
| Compatible Meters |
Peimar PSI-X-3PMETER-HY (up to 80 A direct insertion) Peimar PSI-X-3PMETER-HY-TA (up to 200 A indirect measurement, external CT) |
| Functionality |
Measure electrical parameters of draw and injection, necessary for managing external loads and charge/discharge of the storage system |
General Information
| Feature |
Specification |
| Topology |
Transformerless |
| Operating Temperature Range |
-20°C to +60°C (derating from +45°C) |
| Cooling Method |
Natural convection |
| Environmental Humidity |
0% to 100% non-condensing |
| Storage Temperature |
-20°C to +60°C |
| Altitude |
Up to 4000 m |
| Noise |
< 40 dB |
| Protection Class |
IP65 |
| Dimensions (H x W x D) |
654 x 457 x 228 mm |
| Net Weight |
45 kg |
| Warranty |
10 Years |
AC Output
| Specification |
PSI-X3P6000-HY |
PSI-X3P8000-HY |
PSI-X3P10000-HY |
| Nominal AC Power |
6000 VA |
8000 VA |
10000 VA |
| Maximum AC Power |
6600 VA |
8800 VA |
11000 VA |
| Nominal AC Current |
8.7 A |
11.6 A |
14.5 A |
| Maximum AC Current |
9.6 A |
12.8 A |
15.9 A |
| Grid Nominal Voltage |
400 / 230 V, 380 / 220 V |
|
|
| Grid Nominal Frequency |
50 / 60 Hz |
|
|
| Power Factor (cos φ) |
0.8 capacitive - 0.8 inductive |
|
|
| Total Harmonic Distortion (THDi) |
< 3% |
|
|
| Connection |
Three-phase 3L + N + PE |
|
|
AC Output (EPS Mode with Battery)
| Specification |
PSI-X3P6000-HY |
PSI-X3P8000-HY |
PSI-X3P10000-HY |
| Maximum AC Power |
6000 VA |
8000 VA |
10000 VA |
| Maximum Peak Power |
< 12000 VA, 60 s |
< 14000 VA, 60 s |
< 15000 VA, 60 s |
| Nominal Voltage |
400 / 230 V, 380 / 220 V |
|
|
| Frequency |
50 / 60 Hz |
|
|
| Maximum Continuous Current |
8.7 A |
11.6 A |
14.5 A |
| Conversion Time |
< 1.5 s |
|
|
| Total Harmonic Distortion (THDv) |
< 2 % (linear load) |
|
|
| Switching Interlock Panel |
Supply not included. Refer to instructions at www.peimar.com
|
|
|
Efficiency
| Feature |
Specification |
| MPPT Efficiency |
99.9 % |
| Maximum Efficiency |
97.8 % |
| European Efficiency |
97.0 % |
| Battery Charge/Discharge Efficiency |
97.0 / 96.0 % |
Interface
| Feature |
Specification |
| AC Connection |
Terminal block |
| Photovoltaic Input |
MC4 |
| Battery Connection |
Connectors |
| Display |
Backlit LCD, 20 x 4 characters |
| Communication Mode |
Wi-Fi (PSI-X-H-WIFI module included) / LAN (optional PSI-X-H-ETH module) |
| Communication Ports (Internal and Battery) |
Ethernet / RS485 / USB / CAN / BMS |
| Parallel Composition |
Up to 10 inverters of different models in the Noctis 3 line |
Note: The technical data, information, and illustrations contained in this document are for indicative purposes only. Peimar reserves the right to modify the data, drawings, and information at any time without prior notice.
