EFFEKTA KS 5 Series (3–5kW) Manual

Erik Zaikin tarafından
2 dakikalık okuma

Solar Inverter

KS 5 Series (3–5kW)

Overview

EFFEKTA KS 5 series solar inverters convert DC current from solar modules into AC current and feed it into the power grid. They feature a DC/DC converter with a maximum power point tracker (MPPT) on the input side and a single-phase inverter on the output side, synchronized with the grid. These inverters are available in models with either 1 MPP tracker (ST) or 2 MPP trackers (DT) and are ideal for private use.

Special Features

  • Outstanding efficiency (up to 98.3%)
  • Lightweight and compact design
  • Extended input voltage range up to 600 VDC
  • Simple operation with 4 buttons and LCD display
  • SOLARMAN app connection for easy operation, monitoring, and yield evaluation
  • Optional features: WLAN-Plug, external DC disconnect switch, external current sensor

Characteristics

  • Euro efficiency up to 97.9%
  • High MPPT accuracy
  • Low night power loss
  • Perfect cooling concept without fans
  • Easy installation

Specifications

Models: KS 5 3000ST, KS 5 5000DT

Input (DC)

  • Nominal DC power: 3000 W (3000ST), 6000 W (5000DT)
  • Max. DC voltage: 600 VDC
  • Max. input current per tracker: 15 A
  • Number of MPP trackers: 1 (3000ST), 2 (5000DT)
  • MPPT voltage range: 80 - 560 VDC

Output (AC)

  • Nominal AC power: 3000 W (3000ST), 4600 W (5000DT)
  • Max. AC power: 3300 W (3000ST), 4600 W (5000DT)
  • Max. output current: 14.5 A (3000ST), 20 A (5000DT)
  • AC voltage: 1 / N / PE, 230 VAC
  • AC voltage window: 184 VAC – 262 VAC (Base 230 VAC)
  • Frequency: 50 Hz, auto detect
  • Power factor: 1
  • Total harmonic distortion (THDi): < 3%

Efficiency

  • Max. efficiency: 98.1% (3000ST), 98.3% (5000DT)
  • Euro-efficiency: 97.7% (3000ST), 97.9% (5000DT)

General/Mechanical Data

  • Dimensions (H x W x D): 380 x 380 x 150 mm
  • Weight: 10 kg (3000ST), 11 kg (5000DT)
  • Operating temperature range: -25°C to +60°C
  • Ingress protection: IP65 (not intended for outdoor use)
  • Cooling concept: Convection cooling
  • LCD Display: Yes
  • Communication Interface: RS485/external Wi-Fi (optional)
  • Compatibility: SOLARMAN (yes), Solar-LogTM (no)

Terminals

  • Input (AC): Terminal connections
  • Output (DC): MC-4

Protection

  • Utility grid: Over/under voltage, over/under frequency, ground fault monitoring, DC isolation fault
  • Short circuit: DC input: reverse polarity protection/electronic circuit; AC output: output relay/electronic circuit

Regulations/Standards

  • Safety: IEC 62109-1:2010, EN 62109-1:2010, IEC 62109-1:2011, EN 62109-2:2011, VDE V 0126-1-1:2013, VDE-AR-N 4105:2018, VDE V 0124-100:2020
  • EMC: EN 61000-6-1:2019, EN 61000-6-3:2007+A1:2011
  • Certifications: CE

Note: Power reduction in the corresponding country specification "Germany" according to VDE-AR-N-4105. Exceeding or outside of MPPT voltage range will result in an error message and no power feeding.